Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working it could be because of a dead coin-cell battery or damaged receiver modules, water issues, or a malfunctioning chip. These are all simple fixes that can get your car back to speed in a matter of minutes!
Car keys can also be damaged due to the fact that the blade on the key gets worn. This is an easy fix if you visit your local Car Key Man Auto Locksmith and let them put in the new key blade for you.
Battery
The battery that powers the key fob on your Peugeot 308 can sometimes die or become insufficient to send an effective signal to the car. The key fob could stop working and prevent you from locking or unlocking your doors, or even starting the engine. You'll need a replacement battery for your key fob to repair this.
You can buy a brand new battery at an auto parts store, or at your local hardware store. When you purchase the battery, make sure that it's brand new and hasn't been on the shelf for too long. A new battery will have more capacity and can send a more powerful signal to the car.
After replacing the battery try unlocking the doors and locking them with the key fob. If the doors don't unlock the issue is likely with the car's receiver module which can be changed by your local Peugeot dealer.
It's also possible that the chip inside your key fob has been damaged. You can cause damage to your key fob if you drop it on the ground or expose it to moisture. The rubber seals that protect your chip from moisture can become worn out over time. This is particularly true if you expose your key fob to water over long periods of time, for example, submerging it at the beach in the ocean. To avoid this you must keep your key fob free of the reach of moisture and away from water.
Water Damage
If your key fob gets soaked regardless of whether you dropped it into the pool or threw it into a puddle, don't assume it's a loss. The key fob is protected by rubber seals, but prolonged exposure to water can affect the electronic chip. Water is a good conductor and any water that enters the key fob will trigger an array of short circuits that eventually destroy the electronic chip. After removing the battery scrub its contacts with isopropyl Alcohol and dry it completely before putting it back into.
Your Peugeot 308 may not start because of an unresponsive battery. If you have a spare vehicle, jumper cables can be used to get the engine going again. If the battery is defective it is required to replace it.
Another reason could be a malfunctioning receiver in the vehicle, which can prevent it from receiving a signal from the key fob. The key fob may be damaged or there may be an issue with the antenna, wiring or even the key fob itself. If peugeot car key replacement G28 are using a new key fob it may need to be programmed for the vehicle. If you're not able to solve the issue, call a professional technician. A skilled technician will be able to diagnose the problem quickly and fix it immediately.
Radio Interference
Signs like keys not being recognized or having a limited range typically indicate that there is an interference in the system. The interference could be transmitted or radiated, which is caused by power cables and speaker cables being too close to electrical components. In general, rerouting cables and moving them away from these components will solve the issue.
It's unlikely someone is listening to the key fob's signal in attempt to steal your vehicle, but it's possible that radio interference has drowned out the signal. This is a simple issue to solve.
If your key fobs that aren't being recognized, try using a fresh battery. Also, make sure that the battery you are using is the proper size and type. Batteries that are not the right dimensions can harm your battery.
These devices could interfere with the key signal if they operate on the same radio frequency. It is best to avoid using these devices with your key fob.
Pairing Issues
The remote keyless entry system of automobiles has a receiver which receives radio signals from the key fob. You will not be able start your vehicle if this receiver is malfunctioning even if the key fob is working and is reprogrammable. The issue can result from a variety of causes, including the dead battery in the coin and water damage. The receiver may also be malfunctioning due an internal or software issue or damage to the key itself.
One of the most frequent reasons for why your Peugeot 308 key fob doesn't work is that the coin battery inside has died. You can replace it with a brand new battery however, it is essential to get the right battery for your key fob. The wrong battery could cause more problems with the key fob, therefore it's best to use the original or an alternative that is similar in size, voltage and specifications.
Another reason the reason why your Peugeot 308 key fob might not be working is that it has been paired to another vehicle. It is possible that you have accidentally given the key fob to a friend or the key was used to unlock other vehicles. This can be resolved by reprogramming the fob with an OBDII scanner. This scanner will typically ask you for specific details regarding your vehicle, like the VIN or engine type, and it's essential to enter this correctly.